Printable version

Drivers & software

SGI product documentation and software downloads are currently being migrated, please visit the SGI portal for your SGI documentation and software needs during this migration period.

* RECOMMENDED * HP Dynamic Smart Array B120i/B320i SATA RAID Controller Driver for Red Hat Enterprise Linux 7 (AMD64/EM64T)

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note:  Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type: Software - Driver Update
Version: 1.2.10(9 Sep 2014)
Operating System(s): Red Hat Enterprise Linux 7 Server
File name: hpvsa-1.2.10-120.rhel7u0.x86_64.dd.gz (673 KB)
This driver diskette image provides the binary driver modules pre-built for Red Hat Enterprise Linux 7 (AMD64/EM64T) to enable the HP Smart Array B120i/B320i SATA RAID Controller.

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


  • Support added for Red Hat Enterprise Linux 7.

To ensure the integrity of your download, HP recommends verifying your results with this MD5 Checksum value:

0cbf8a6afa782d8fc68530113d083f48 hpvsa-1.2.10-120.rhel7u0.x86_64.dd.gz

Reboot Requirement:
Reboot is required after installation for updates to take effect and hardware stability to be maintained.


Installation:

CREATING A DRIVER UPDATE USB-KEY

MAKING DRIVER UPDATE USB-KEY UNDER A LINUX-LIKE OS:

  • Save the "hpvsa-<version>.<OSupdate>.x86_64.dd.gz" file into a temporary directory. Use GUNZIP to extract "hpvsa-<version>.<OSupdate>.x86_64.dd" from this file into the same directory.
  • Insert the USB-Key. Unmount USB-Key if it was automounted.
  • Write the hpdsa-<version>.<OSupdate>.x86_64.dd file to the the USB-Key device.  (Ex. USB-Key is /dev/sdc - dd if=hpdsa-<version>.<OSupdate>.x86_64.dd of=/dev/sdc1)

INSTALLATION

At the initial OS installation screen be sure to:

  • For UEFI systems, press "e" to edit grub and append the parameters to the "linuxefi" line.
  • For non-UEFI systems, press ESC key and append the parameters to keep the ahci driver from interfering with the hpdsa drivers.
  • IMPORTANT: Remove the USB-Key once the driver has been installed to prevent the OS installer from including the USB-Key as part of the OS storage.

for B120i:  modprobe.blacklist=ahci inst.dd
for B320i:  inst.dd
 


End User License Agreements:
Hewlett-Packard End User License Agreement


Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


Supported Devices and Features:

SUPPORTED KERNELS:
The kernels of Red Hat Enterprise Linux 7 (AMD64/EM64T) supported by this driver diskette are:
3.10.0-123.el7 - Red Hat Enterprise Linux 7(AMD64/EM64T) and future errata kernels.


Version:1.2.16-102 (2 Dec 2016)
Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Improved Performance levels.

Added support for Red Hat Enterprise Linux 7 Update 3.


Version:1.2.14-113 (22 Dec 2015)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


The following issues were resolved:

  • Intermittent blue screen 0x133 (DPS_WATCHDOG_VIOLATION) error would display and the system would stop responding. This error was caused by a race condition that was exposed under particular IO patterns for controllers with write cache enabled.
  • CPU pinning enabled- PARSE and FLUSH tasks are pinned to the same CPU to prevent a potential race condition in the driver which might result in an OS panic with system restart.

 

Enhancements

Added Red Hat Enterprise Linux 7 Server Update 2 support.


Version:1.2.14-100 (15 Jun 2015)
Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


Fixes the below issue:

When issuing the "shutdown -h now" command at the Linux prompt, the server begins shutting down, but instead of halting and powering off, the server resets itself and boots back up.


Version:1.2.12-112 (6 Apr 2015)
Enhancements

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


Added support for Red Hat Enterprise Linux 7 Update 1.


Version:1.2.12 (30 Mar 2015)
Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


  • Spin lock update to fix a potential boot hang.

Version:1.2.10 (9 Sep 2014)
Enhancements

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


  • Support added for Red Hat Enterprise Linux 7.


Subscribe to driver and support alerts

Sign up now for customized driver, security, patch, and support email alerts.
Type: Software - Driver Update
Version: 1.2.10(9 Sep 2014)
Operating System(s):
Red Hat Enterprise Linux 7 Server

Description

This driver diskette image provides the binary driver modules pre-built for Red Hat Enterprise Linux 7 (AMD64/EM64T) to enable the HP Smart Array B120i/B320i SATA RAID Controller.

Enhancements

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


  • Support added for Red Hat Enterprise Linux 7.

Installation Instructions

To ensure the integrity of your download, HP recommends verifying your results with this MD5 Checksum value:

0cbf8a6afa782d8fc68530113d083f48 hpvsa-1.2.10-120.rhel7u0.x86_64.dd.gz

Reboot Requirement:
Reboot is required after installation for updates to take effect and hardware stability to be maintained.


Installation:

CREATING A DRIVER UPDATE USB-KEY

MAKING DRIVER UPDATE USB-KEY UNDER A LINUX-LIKE OS:

  • Save the "hpvsa-<version>.<OSupdate>.x86_64.dd.gz" file into a temporary directory. Use GUNZIP to extract "hpvsa-<version>.<OSupdate>.x86_64.dd" from this file into the same directory.
  • Insert the USB-Key. Unmount USB-Key if it was automounted.
  • Write the hpdsa-<version>.<OSupdate>.x86_64.dd file to the the USB-Key device.  (Ex. USB-Key is /dev/sdc - dd if=hpdsa-<version>.<OSupdate>.x86_64.dd of=/dev/sdc1)

INSTALLATION

At the initial OS installation screen be sure to:

  • For UEFI systems, press "e" to edit grub and append the parameters to the "linuxefi" line.
  • For non-UEFI systems, press ESC key and append the parameters to keep the ahci driver from interfering with the hpdsa drivers.
  • IMPORTANT: Remove the USB-Key once the driver has been installed to prevent the OS installer from including the USB-Key as part of the OS storage.

for B120i:  modprobe.blacklist=ahci inst.dd
for B320i:  inst.dd
 


Release Notes

End User License Agreements:
Hewlett-Packard End User License Agreement


Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


Supported Devices and Features:

SUPPORTED KERNELS:
The kernels of Red Hat Enterprise Linux 7 (AMD64/EM64T) supported by this driver diskette are:
3.10.0-123.el7 - Red Hat Enterprise Linux 7(AMD64/EM64T) and future errata kernels.


Revision History

Version:1.2.16-102 (2 Dec 2016)
Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Improved Performance levels.

Added support for Red Hat Enterprise Linux 7 Update 3.


Version:1.2.14-113 (22 Dec 2015)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


The following issues were resolved:

  • Intermittent blue screen 0x133 (DPS_WATCHDOG_VIOLATION) error would display and the system would stop responding. This error was caused by a race condition that was exposed under particular IO patterns for controllers with write cache enabled.
  • CPU pinning enabled- PARSE and FLUSH tasks are pinned to the same CPU to prevent a potential race condition in the driver which might result in an OS panic with system restart.

 

Enhancements

Added Red Hat Enterprise Linux 7 Server Update 2 support.


Version:1.2.14-100 (15 Jun 2015)
Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


Fixes the below issue:

When issuing the "shutdown -h now" command at the Linux prompt, the server begins shutting down, but instead of halting and powering off, the server resets itself and boots back up.


Version:1.2.12-112 (6 Apr 2015)
Enhancements

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


Added support for Red Hat Enterprise Linux 7 Update 1.


Version:1.2.12 (30 Mar 2015)
Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


  • Spin lock update to fix a potential boot hang.

Version:1.2.10 (9 Sep 2014)
Enhancements

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


  • Support added for Red Hat Enterprise Linux 7.